RTV-2 Mold Silicone Milky White with Hardener
文章出处:未知网责任编辑:admin作者:人气:发表时间:2022-05-26 10:40
Description:
RTV-2 silicone also called two-component room temperature condensation silicone, it has 2 component: part A and part B, part a is liquid silicone rubber, part B is the curing agent, their mix ratio is 100A : 2B by weight or by volume, they have excellent mobility, easy operability, can cured at room temperature, become to many industries quickly copy essential product.
purposes:
RTV-2 liquid silicone rubber is mainly used for mold making, like concrete mold, cement mold, wax, tyre mold, soap mold, Polyster resin, Epoxy resin, PU foam resin and the replication of arts and crafts, antique furniture, ceramics, craft candles, gypsum decoration, large sculpture, Buddha mold, building decoration,anaglyph furniture,imitation marble, imitation natural stone, shoe's mold, lighting,simulation of the human body,imitation bronze craft, model facility, rockery etc many mold manufacture industry.
Product data (at room temperature 23℃)
Note: all of the above data all can customized by customers requirements.
Torage:
RTV-2 silicone also called two-component room temperature condensation silicone, it has 2 component: part A and part B, part a is liquid silicone rubber, part B is the curing agent, their mix ratio is 100A : 2B by weight or by volume, they have excellent mobility, easy operability, can cured at room temperature, become to many industries quickly copy essential product.
purposes:
RTV-2 liquid silicone rubber is mainly used for mold making, like concrete mold, cement mold, wax, tyre mold, soap mold, Polyster resin, Epoxy resin, PU foam resin and the replication of arts and crafts, antique furniture, ceramics, craft candles, gypsum decoration, large sculpture, Buddha mold, building decoration,anaglyph furniture,imitation marble, imitation natural stone, shoe's mold, lighting,simulation of the human body,imitation bronze craft, model facility, rockery etc many mold manufacture industry.
Product data (at room temperature 23℃)
Typical general characteristics | HF-308 | HF-318 |
Color | Semitransparent | White |
Mixed Viscosity (cps) | 20000 | 27000 |
Hardness | 0-35(±2) | 0-35(±2) |
Density at (23℃) | 1.08 g/cm³ | 1.08 g/cm³ |
Tear strength (N/mm) | ≥25 | ≥30 |
Tensile strength (Mpa) | ≥4.5 | ≥5.0 |
Elongation at break (%) | ≥550 | ≥400 |
Linear shrinkage (%) | ≤0.1%-0.3% | ≤0.1%-0.3% |
Mix Ratio By Weight | 100A:1.5B | 100A:1.5B |
Pot Life (min) | 20-30 | 20-30 |
Cure time (h) | 2-6 | 2-6 |
Torage:
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Mold silicone characteristics:
should be kept sealed in ventilation, cool, dry place, away from the children's place, prevent sun direct illuminate, belongs no dangerous goods of transportation.
Mold silicone characteristics:
1.With no deformation, high temperature resistant, resistant to acid and alkali, and no expansion characteristics
2.Low shrinkage ratio, less than 0.1% shrinkage
3.Good elasticity, tear strength, tensile strength, make your products not only beautiful, but also can make the intricate product, high temperature resistant even reach 350 centigrade and 50 centigrade below zero all have no problem, the cured silicone still keep soft, not brittle, and perfect simulation effects.
4.vulcanized at room temperature, easy operation
5.High Duplication Times
Shelf life:
Under the room temperature is 25-30 centigrade, 12 months
Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 1kg, 5 kg, 20 kg, 25 kg and 200 kg
Storage and transportation:
Shelf life:
Under the room temperature is 25-30 centigrade, 12 months
Packing specification: this product is made from steel drum/plastic barrels packaging, specification is 1kg, 5 kg, 20 kg, 25 kg and 200 kg
Storage and transportation:
should be kept sealed in ventilation, cool, dry place, away from the children's place, prevent sun direct illuminate, belongs no dangerous goods of transportation.
CC / Chen Yu Hua
Sales Manager
HONG FENG HAO TECHNOLOGY CO.,LTD
WeChat/Whatsapp:+86 13662816580
E-mail:iamsandycc@outlook.com
Twitter:@iamsandycc
Add:Chang 'an city, Dongguan City China
下一篇:ab two-component liquid silicone 1:1 translucent 上一篇:没有了
此文关键字:
推荐产品
最新资讯文章
- 在液体硅胶行业来说,鸿风的价格是否有优势?
- 硅胶材料有什么优点?硅胶材料与PVC材料有什么区别
- 鸿风模具硅胶口碑怎么样
- 为什么选择鸿风硅胶?有哪些优势?
- 硅胶材料的发展前景怎么样?
- 【RTV-2工业级模具硅胶价格】
- 硅胶的性能优势
- 液体涂布硅胶和PVC材料哪个好用?
- 液体模具硅胶和固体硅胶的区别
- 如何使用液体硅胶制作蛋糕模具
您的浏览历史
- 无浏览历史